EasyManuals Logo

GE LOGIQ P6 Service Manual

GE LOGIQ P6
478 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #195 background imageLoading...
Page #195 background image
GE HEALTHCARE
DIRECTION 5245279, REVISION 3 LOGIQ™ P6/P6 PRO SERVICE MANUAL
Section 7-7 - Common Diagnostics 7 - 17
7-7-2-4 CD/DVD Drive Test
NOTE: Although the global aspect of the diagnostics allow for DVD testing, the LOGIQ™ P6/P6 Pro does not
have a DVD drive.(Option)
DVD/CD-ROM Test (All) - The CD-ROM/DVD test examines the CD-ROM/DVD drive to make sure
it is working properly. You may use either a data CD-ROM disk or a DVD disk for these tests. You
cannot use an audio CD, such as a regular commercial music CD, with this test.
NOTE: The PC is sometimes slow in recognizing a newly inserted CD-ROM/DVD disk. It is best to wait a few
seconds after inserting a disk into the drive before you run any tests.
There are two types of CD-ROM/DVD tests:
1.) Seek Tests: Ensures the drive can access all locations on a disk, and
2.) Read Tests: Ensures the drive can read all the data.
DVD/CD-ROM: Linear Seek - Tests that all locations can be accessed on a CD-ROM or DVD disk
in a linear fashion, starting from the first to the last.
DVD/CD-ROM: Random Seek - Tests that all locations can be accessed on a CD-ROM or DVD
disk randomly.
DVD/CD-ROM: Funnel Seek - Tests that all locations can be accessed on a CD-ROM or DVD disk
in a funnel fashion, starting from the first then moving to the last, then, at the next pass starting from
the second location then moving to the next to the last, and so on
DVD/CD-ROM: Linear Read - Reads the data on the CD-ROM or DVD in a linear fashion, starting
from the start to the end.
DVD/CD-ROM: Random Read - Reads the data on the CD-ROM or DVD randomly.
7-7-2-5 Video Test
Video Test (All) - This diagnostic tests your system's video capabilities. This involves testing the
video memory with 18 patterns, testing your graphics acceleration, and text output. You will see
these tests being performed on your monitor.
You can cancel this test at any time by hitting the Escape (Esc) key.
The following tests are performed on your monitor:
Video: Memory - Video memory is tested by filling the video buffer with 18 test patterns, one pattern
at a time. The tests will fill the entire screen with a single color.
Video: Data Transfer - This tests the graphics acceleration part of your video controller. These
tests will appear on your screen as black and white concentric squares and rectangles of various
sizes and colors. If errors are detected, the locations of the problems are displayed.
Video: Text Output - This test prints a text string in random sizes and colors to tests your video
device driver and video controller.

Table of Contents

Other manuals for GE LOGIQ P6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE LOGIQ P6 and is the answer not in the manual?

GE LOGIQ P6 Specifications

General IconGeneral
BrandGE
ModelLOGIQ P6
CategoryMedical Equipment
LanguageEnglish

Related product manuals