GE LOGIQ P6 Service Manual

GE HEALTHCARE
DIRECTION 5245279, REVISION 3 LOGIQ™ P6/P6 PRO SERVICE MANUAL
Section 8-4 - Software Installation 8 - 127
8-4-4-3 Setting Printer Preferences
NOTE: If the 1-3-5 printer setting back-up is NOT performed, ignore this section.
1.) Insert removable disk or media that the printer setting was saved.
2.) Go to Utility -> System -> Peripherals click the Printers.
3.) Press the left button of the trackball on the printer which need to be restore from the saved printer
setting -> Click "properties" -> Click "Printing Preferences".
4.) If Sony D897 is used, click "Read".
Figure 8-189 Printer set restore
Figure 8-190 Printer set restore

GE LOGIQ P6 Specifications

General

Brand	GE
Model	LOGIQ P6
Category	Medical Equipment
Language	English