GE HEALTHCARE
DIRECTION 5245279, REVISION 3 LOGIQ™ P6/P6 PRO SERVICE MANUAL
8 - 150 Section 8-4 - Software Installation
8-6-2-2 Software Reloading
1.) The Base S/W load starts automatically immediately after boot up
2.) After finishing C: partition reloading, the system restarts automatically.
3.) When the system restarts, an application installation starts automatically.
Figure 8-225 Reloading C:\ partition from Reloading Ghost Image
Figure 8-226 Application installation
To Next Page
Loading...
