GE LOGIQ V1

LOGIQ V2/LOGIQ V1 – Basic Service Manual Index-1
5610739-100 English Rev.10
Index
A
abbrevations, 9-3
acclimate time, 2-3
authorized representative in EU, 1-29
average setup time, 3-3
B
before installation (site preparations), 2-1
Boot Up, 3-17
C
cable inspection
mains cable inspection, 10-14
care and maintenance, 10-1
warnings, 10-3
CE compliance, 1-25
change history, i-1
chapter 1
introduction, 1-1
chassis leakage current test, 10-26
cold or hot
if the unit is very cold or hot, 2-3
compatibility
hardware/software, 9-4
completing the setup, 3-14
compliance, 1-25
configuration, 3-18
connect
probe, 3-17
connections
on the rear panel, 3-16
console environmental requirements, 2-3
console requirements, 2-3
contact information, 1-27
contents in this manual, 1-3
conventions used in book, 1-6
cooling, 2-5
copyrights, i-17
customer assistance, 1-27
phone numbers, 1-28
customer order
verification, 3-13
customer provided prerequisite, 7-13
D
damage
in transportation, 3-7
damage in transport, i-14
dangerous procedure warnings, 1-22
data network setup requirements, 2-19
desirable features, 2-15
DICOM network function, 2-19
DICOM setup requirements, 2-20
display PDF files
from manual CD-ROM
print PDF files
from manual CD-ROM, 4-21
E
electrical requirements, 2-6
EMI limitations
EMI limitations, 2-9
general requirements, 2-6
site circuit breaker
site circuit breaker, 2-7
site power outlets
site power outlets, 2-7
specific requirements for the unit, 2-6
unit power plug
unit power plug, 2-7
electrical safety, 1-18
electrical safety tests, 10-20
electrical specification, 3-15
electromagnetic interference
abatement, 2-10
prevention, 2-10
electrostatic discharge prevention, 1-26
EMC, 1-25
compliance, 1-25
what is EMC?, 1-25
EMI, 1-25
abatement, 2-10
prevention, 2-10
protection, 3-13
environmental dangers, 2-22
environmental specifications for the unit, 2-4
errors, i-15
ESD, 1-25
ESD prevention, 1-26
examine packages, 3-6