Inspection and MaintenanceStandard Practices
SP-12
(1) 7-pound sledge
(1) 14-pound sledge
Mallet — plastic, rawhide
Pry bars
(2) 18-inch foot bars
(2) 6-foot pry bars
Carpenter’s level
Wood saw
2 Hacksaws with extra blades
Portapower — hydraulic jack set
(1) 10-foot measuring tape
Hand stones
4 coarse
4 fine
1 set of easy out (screw extractors)
1 set of taps and dies to 1 1/2 inches (1, 1-1/4, 1-1/2 x 8 thd)
Impact wrenches
(1) 1/2-inch drive with sockets
(2) 3/4-inch drive with sockets
(1) 1-inch drive with sockets
Electric or air drill with chuck to 1/2 inch with bits
(4) 50–foot air hoses with 1/2-inch “whips”
Air grinder with grinding wheels
Dial indicators
(1) Starrett “Last Word”
(1) Starrett Universal
(2) 0- to 1-inch indicator plus magnetic bases, arms and swivels
Micrometers
(1) 0–1 outside
(1) 0–8 outside (set)
(1) 2–8 inside (set)
(1) 0–6 depth
Feeler gauges
1 set 0.0015 to 0.030 12 inches long
2 sets 0.0015 to 0.030 4–6 inches long
1 Machinist’s level
1 Telescope gauge set
To Next Page
Loading...
