Standard PracticesInspection and Maintenance
SP-13
(1) 12-inch and (1) 18-inch machinist’s scale
Mobile crane
50 tons at 25 feet radius — 45 feet high (71F unit RTR)
10 tons at 25 feet radius — 45 feet high from ground
(U.H. turbine casing)
Helicoil insertion tools
Engine-driven air compressor
90 psi with sufficient volume to drive impact wrenches
Oxyacetylene cutting outfit
Engine-driven welder
Chain hoists
(1) 10 ton
(1) 8 ton
(1) 3 ton
Comealong
(2) 1/2 ton
(2) 1-1/2 ton
(2) 3-1/2 ton
Eyebolts
(8) 1/2-13 shouldered
(8) 5/8-11 shouldered
(8) 3/4-10 shouldered
(4) 1-8 shouldered
(2) 1-1/2 — 6 shouldered
Eyebolts, special
(4) 1/2 - 13 x 12 inches
(4) 5/8 - 11 x 12 inches
Shackles
(4) 3/16- inch pin
(4) 1/4-inch pin
(4) 3/8-inch pin
(4) 1/2-inch pin
(4) 3/4-inch pin
Slings — cables
(4) 3/8 x 12 feet
(4) 1/2 x 12 feet
(2) 3/4 x 30 feet
(2) 3/4 x 3 feet
Screw jacks (as required) 25-ton minimum capacity.
To Next Page
Loading...
