Inspection and Maintenance — GEK 107048Standard Practices
SP-54
MS-6001B DLN-1 — Major Inspection Recommended Spare Parts (Cont’d)
Recommended
Quantity
PIPING ARRANGEMENT COOLING & SEALING AIR (ML0909) (Cont’d)
20. Union, Tube 2
21. Union, Tube 4
22. Union, Tube 7
23. Tee, Union Tube 2
24. Nut, Self Locking *5
25. Nut, Self Locking *6
26. Nut, Self Locking *6
NOZZLE ARRANGEMENT, TURBINE FIRST STAGE (ML1401)
1. First Stage Nozzle Arrangement 1
RING RETAINING, TURBINE NOZZLE FIRST STAGE (ML1401)
1. Insert, Wire Locking (Helicoil) 4
2. Insert, Wire Locking (Helicoil) 9
3. Wire, Insert (Helicoil) 30
4. Wire, Insert (Helicoil) 1
RING ASSEMBLY, SUPPORT FIRST STAGE NOZZLE (ML1403)
1. Support Ring First Stage 1
NOZZLE ARRANGEMENT, TURBINE SECOND STAGE (ML1402)
1. Second Stage Nozzle Arrangement 1
NOZZLE ARRANGEMENT, TURBINE THIRD STAGE (ML1409)
1. Third Stage Nozzle Arrangement 1
CASE ASSEMBLY COMPRESSOR INLET & NO. 1 BEARING (ML0801)
1. Liner Bearing No. 1 1
2. Oil Deflector No. 1 Bearing 1
3. Stationary Oil Seal Assembly 1
4. Forward Stationary Oil Seal 1
5. Air Seal Assembly 1
6. Pin, Shoulder, Headless 1
7. Screw, Flat Head (0.375–16 x 0.750) 2
8. Washer 2
9. Pin, Dowel 1
BEARING NO. 2 ASSEMBLY (ML1502)
1. Liner Bearing No. 2 1
To Next Page
