Standard PracticesInspection and Maintenance — GEK 107048
SP-59
MS-6001B DLN-1 — Major Inspection Recommended Spare Parts (Cont’d)
Recommended
Quantity
BOLTING & DOWELING DRAWING (ML1604) (Cont’d)
6. Nut, Twelve Point (Compressor Discharge Casing to Turbine Casing) *8
7. Bolt, Twelve Point (Turbine Casing to Exhaust Frame) *5
Note: The above quantities cover approximately 20% of the top half casings
bolting requirements only.
RADIATION SHIELD (ML0531)
1. Radiation Shield Thermocouples 16
THERMOCOUPLES, EXHAUST AND TRIP (ML0623)
1. Exhaust and Trip Thermocouples 16
To Next Page
