GE MS-6001B - Page 84

Inspection and Maintenance — GEK 107048Standard Practices
SP-58
MS-6001B DLN-1 — Major Inspection Recommended Spare Parts (Cont’d)
Recommended
Quantity
ENCLOSURE TO BASE ARRANGEMENT (ML1605) (Cont’d)
30. Washer, Plain Wide *12*
31. Lockwasher, Spring *13*
32. Bolt, Hex Head *4
33. Nut, Hexagon *7
34. Bolt, Hex Head *6
35. Bolt, Hex Head *3
36. Washer, Plain Regular *2
37. Nut, Hexagon *2
38. Bolt, Hex Head *7
39. Washer *7
40. Bolt, Hex Head *3
41. Nut, Hexagon *2
42. Bolt, Hex Head *8
43. Bolt, Hex Head *3
44. Bolt, Hex Head *2
FRAME, ASSEMBLY EXHAUST (ML0706)
**1. Gasket AR
2. Bolt, Hex Head 18
3. Nut, Hex 18
CASE MACHINING TURBINE (ML0705) (Turbine Shell Horizontal Flange Hardware)
1. Stud *1
2. Nut, Twelve Point *9
3. Bolt, Twelve Point *5
4. Bolt, Twelve Point *1
5. Stud, Body Bound *1
6. Stud *1
7. Stud *1
BOLTING & DOWELING DRAWING (ML1604)
1. Bolt, Hex Head (Compressor Casing To Inlet Casing) *6
2. Bolt, Hex Head (Compressor Casing To Inlet Casing) *1
3. Bolt, Twelve Point Head (Compressor Casing To Discharge Casing) *5
4. Bolt, Twelve Point (Compressor Discharge Casing To Turbine Casing) *1
5. Bolt, Twelve Point (Compressor Discharge Casing To Turbine Casing) *8