GEK-113032A W650 Wind Generator Protection System 2-1
2 PRODUCT DESCRIPTION 2.1 OVERVIEW
2
2 PRODUCT DESCRIPTION 2.1OVERVIEW 2.1.1 W650 OVERVIEW
The modular W650 unit has been designed as a comprehensive generator controller specially adapted to wind turbine
generators. Based on the state of the art 650 family, it utilizes modern 32 bit processor platform to provide a complete
solution not only for the needs of present systems but also ready for the future. W650 simplifies the design of systems in
wind turbine generation due to the complete set of protection, measurement, control and recording functions. Maintenance
is eased thanks to the modular design whereas cost is scalable depending on the options to allow a cost effective solution
from medium to large size generators.
The main features of W650 devices include:
• Directional overcurrent protection for phases, neutral, ground and sensitive ground
• High Speed Under and overvoltage protection
• Neutral Overvoltage
• Voltage Unbalance
• Under and overfrequency protection
• Autorecloser
• Metering
• Oscillography registers, fault reports, data logger
• Bay control (open/close commands, etc.)
• Bay mimic.
• Communications (RS232/RS485/CAN/Ethernet)
To Next Page
Loading...
