GE Multilink ML3000 User Manual

13–22 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
RAPID SPANNING TREE PROTOCOL CHAPTER 13: RAPID SPANNING TREE PROTOCOL
 Save Configuration.
To reset RSTP back to normal mode, select “Normal RSTP” for the Protocol setting. Save the
configuration by clicking on the icon.
 Select the Configuration > RSTP > RO Mode menu as shown below:
 Click the Edit button to configure RO Mode.
 Select the desired ports as shown below, then click OK to exit.
ENABLE STATUS...
...THEN SAVE

GE Multilink ML3000 Specifications

General

Brand	GE
Model	Multilink ML3000
Category	Network Router
Language	English