SHENZHEN GETECH TECHNOLOGY CO,.LTD
3 USB Driver Installation
3.1 USB Driver Installation for Win7 OS
Power the MeCreator 2 up and connect it to computer with the USB cable, the driver will be installed
automatically. After installation, please enter Device manager and find the USB Serial Port which is the
communication port for the printer and computer.
If the driver can not be automatically installed, please download the USB driver here and manually install it.
3.2 USB Driver Installation for Mac OS
For installing the driver and uploading the firmware in Mac OS, please refer to FAQ.
To Next Page
Loading...
Need help?
General
