Geeetech ME CREATOR 2 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
10
4. Set up Repetier Host
The next step should be, to configure your printer so you can connect your computer with the host. Open
Repetier Host.
When you start Repetier Host for the first time, you need to set up parameters for MeCreator 2. Click the
Printer Settings on the top right corner, you will be presented with the following window.

Geeetech ME CREATOR 2 Specifications

General

Brand	Geeetech
Model	ME CREATOR 2
Category	3D Printers
Language	English