SHENZHEN GETECH TECHNOLOGY CO,.LTD
9.FAQ
If you have any problem when you use the printer, you can visit our forum http://www.geeetech.com/forum/There
are detailed solutions on the forum. FAQ are as follows:
9.1 How to upload the firmware?
9.1.1 upload the firmware in Win7 OS
To upload the firmware, we need following tools:
1.Arduino IDE
Arduino1.0.1 is recommended, and you can download it here:
http://www.geeetech.com/wiki/images/a/a2/Arduino-1.0.1-windows.zip
2. the firmware for the printer
Me Creator uses GT2560 control board. Download the firmware of Me Creator2 here:
http://www.geeetech.com/forum/viewtopic.php?f=20&t=17046
After Arduino and firmware are downloaded, you can upload the firmware. First please connect the printer
and computer with USB cable, then open arduino1.0.1 software to upload the firmware. Choose
corresponding control board and COM port, and click upload button to upload the firmware.
To Next Page
Loading...
Need help?
General
