Geeetech ME CREATOR 2 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
39
7.1 Printing Setting
Set the layer height and height of the first layer in the option of Print settings. The layer height of Me creator
2 can be between 0.05-0.3mm. Considering of precision and speed, 0.2mm is the most appropriate. Set the
first layer height as 0.35mm by default.

Geeetech ME CREATOR 2 Specifications

General

Brand	Geeetech
Model	ME CREATOR 2
Category	3D Printers
Language	English