SHENZHEN GETECH TECHNOLOGY CO,.LTD
ABOUT MECREATOR2
MeCreator2 makes solid, three-dimensional objects out of melted Filament such as PLA or ABS. First,
use software to translate 3D design files into instructions for the MeCreator2. Then transfer those
instructions to the MeCreator2 via USB drive, USB cable. The MeCreator2 will melt filament such as PLA
or ABS and squeeze it out onto the build plate in thin lines to build your object layer by layer. This method
of 3D printing is called fused deposition modeling(FDM).
MeCreator 2 is our new desktop 3D printer with half-opened and box-type design and
160x160x160mm building volume. It is optimized and improved based on the previous MeCreator, bringing
MeCreator 2 with more exciting features.
Like MeCreator, MeCreator 2 will be delivered after assembly as well, which saves you from the
trouble of assembling. Get a MeCreator 2 now, and welcome to the wonderful world of 3D printing!
To Next Page
Loading...
Need help?
General
