Geeetech ME CREATOR 2 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
37
7 Slic3r Setting
So far we can begin printing. But in order to achieve better effect, we need set the slicing parameters such as
the diameter of the filament, speed, layer height. Open the slicing software, slic3r, which comes with
Repetier host. Shown as below:
The following interface will appear:

Geeetech ME CREATOR 2 Specifications

General

Brand	Geeetech
Model	ME CREATOR 2
Category	3D Printers
Language	English