SHENZHEN GETECH TECHNOLOGY CO,.LTD
You can set the printing speed here:
7.2 Filament Setting
Set the filament diameter and printing temperature in the tab of Filament settings. Here we use 1.75mm PLA.
Usually the temperature of the print head is 195-210℃, the hot bed is 60-70℃. Here we set them as 200℃
and 65℃. If you use ABS filament, the recommended temperature of the print head is 230-240℃ (for the
actual temperature please refer to the data from manufacture of filament) and 90-110℃ for the hot bed.
You need to use glue on the hot bed when printing with ABS, which can effectively help the first layer stick
to the platform and avoid warping.
To Next Page
Loading...
Need help?
General
