Geeetech ME CREATOR 2 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
55
8.3 Stand-alone Printing with SD card
If you want to use SD card to print, we can save g.code file into SD card for printing.
Note: the printer can only recognize .gcode file, and it can not be put in any folder!
8.3.1 Save
Click Save to File, and choose save button in the dialog. Choose the saving path, and produce g.code file
which can be used for printing with SD card.

Geeetech ME CREATOR 2 Specifications

General

Brand	Geeetech
Model	ME CREATOR 2
Category	3D Printers
Language	English