Geeetech ME CREATOR 2 - LCD Menu Introduction

SHENZHEN GETECH TECHNOLOGY CO,.LTD
27
5.2 LCD Controller Test
5.2.1 LCD Menu Introduction
Functions of LCD rotary knob:
1. Press the knob: confirm or enter sub-menu
2. Rotate the knob: roll to choose options or change parameters
LCD homepage:
1. Extruder temperature: current temperature/target temperature
2. Hotbed temperature: current temperature/target temperature
3. Current coordinates of X/Y/Z
4. Feed rate: current printing rate
5. Current rate of printing process
Note: Rotate the knob during printing will change the feedrate in real time.
Press the knob to enter the next level menu:
1. Prepare：Preparing work before printing
2. Control：Setting of temperature and motion parameters of the printer
3. Status display of SD card