SHENZHEN GETECH TECHNOLOGY CO,.LTD
4.5 Printer shape
The “Printer Shape” tab defines your printer shape, or to be more exact the shape of your build area. The
host will use this to limit your moves and to check, if your models fit onto the print bed. You can also define
the position of the x and y end stop.
Recommended settings:
Printer type: Classical printer
Home X：Max Home Y：Max Home Z：Min
X Min：0 X Max: 160 Bed Left: 0
Y Min：0 Y Max: 160 Bed Front: 0
Printing Area: 160 x 160 x 160 (length/width/height)
To Next Page
Loading...
Need help?
General
