Geeetech ME CREATOR 2 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
5
Step 2 Remove the Me Creator 2 from foam box and set it down on a stable surface.
Step3 Remove the zip tie that prevent the extruder from moving during shipping.
Note: Do not move the building platform up and down with force or it will not be leveled. If you want to
raise it, please use manual control on Repetier Host to move the Z axis.

Geeetech ME CREATOR 2 Specifications

General

Brand	Geeetech
Model	ME CREATOR 2
Category	3D Printers
Language	English