913287/BP0808 16 PRINTED IN U.S.A.
SAFETY
NOTE: Fall protection should comply with applic-
able U.S. OSHA regulations: 1910.67 (c)(2)(v) (for
General Industry) or 1926.453 (b)(2)(v) (for
Construction).
10. Lanyards, when provided, shall be arranged so as
not to cause a tripping hazard.
11. Body harnesses, when provided, should have a
width of at least 1.75 inches (44 mm).
12. Structural safety factor - All load supporting
structural elements of the work platform shall
have a structural safety factor of not less than 2-
to-1 based on the minimum yield strength of the
materials used.
Courtesy of Crane.Market
To Next Page
Loading...