50950260/AP1216 39
Units Screen
Press the top/bottom of navigation rocker button
(M, Figure 17) to switch between SAE or metric
units for values displayed in screens.
Language Screen
The press the top/bottom of navigation rocker
button (M, Figure 17) to switch between English or
Spanish language for values displayed in screens.
DM1 Screen
Displays engine, drive system, control, and safety
system error code message information. Number of
available messages is displayed at the top left of
the screen (T). Use buttons (P and Q, Figure 17) to
scroll through the messages. See “Engine
Diagnostic Chart (DPF Models)” on page 73 for
specific error code details.
DM2 Screen
Continuation of error code message display along
with DM1 Screen. Number of available messages is
displayed at the top left of the screen (T). Use
buttons (P and Q, Figure 17) to scroll through the
messages. See “Engine Diagnostic Chart (DPF
Models)” on page 73 for specific error code details.
Table 2: Status, Maintenance and Error Code Screens
Display Mode Description
DM1
SPN: 0
0 of 0
FMI: 0
OCI: 0
T
DM2
SPN: 0
0 of 0
FMI: 0
OCI: 0
T
To Next Page
Loading...