40 50950260/AP1216
Input Status
Displays input information from electronic control
modules, showing real-time machine
component/control state. Status colors indicate the
following:
• Green – Active
• Black – Inactive
Output Status
Displays output information from electronic control
modules, showing real-time feedback state of
machine components. Status colors indicate the
following:
• Green – Active
• Black – Inactive.
• Yellow – Standby or Not Applicable
• Red – Short Circuit
Table 2: Status, Maintenance and Error Code Screens
Display Mode Description
DIAGNOSTICS INPUTS
Float
Hydro Glide
High Gear
Aux Detent
Air Filter Clog
Alternator
KP Ingnition Run
KP Ignition Start
KP Seat Switch
KP Restraint Bar
Hyd Filter Clog
High Hyd Temp
Engine Pressure
DIAGNOSTICS OUTPUTS
High Gear
Self Level
Hydro Glide
Fuel Pump
Glow Plug
Float
Marker Lts
Rear Work Lts
Front Work Lts
KP Beacon Lts
KP Dome Lt
Disable Park Brake
Tilt/Lift
Starter
All Tach Lock
All Tach Unlock
To Next Page
Loading...