.OUT
You can play and listen in total silence over the headphones without disturbing others in the same room.
Use the Volume slider to regulate the headphone volume.
Play with the pedals
If you have purchased the optional Generalmusic pedals (volume pedal and footswitch), plug them into the
jacks on the rear connections panel: Volume and Damper.
DAMPER
HEADPHONES
DC12V
VOLUMEAUX.OUT
The standard configuration of the pedals is as follows:
• Volume = Master Volume or Section volume
• Damper = Damper (sustain)
Regulate the general Effect volumes
It is possible to regulate the general effect volumes to suit the surroundings.
Although each Performance recalls appropriate effect volume and mixer settings for each track, a general
setting can be applied to render the General Effect Volume more or less intense with a single command.
1. Press the cursor buttons as many times as necessary until the arrowhead in the display appears next to the “REVERB”
or “CHORUS” functions in the MENU list.
Hall 1>
To Next Page
Loading...
Need help?
General
