○○○○○○○○○○○○○
Sounds & Performances 39
○○○○○○○○○○○○○
Store Performance
The STORE PERFORMANCE button allows you to memorize the current panel setting to the Performance at
any moment. You are strongly recommended to use the STORE PERFORMANCE function after carrying out
one of the operations described in the previous paragraph; in this way you are sure to “photograph” the current
panel situation at all times.
Confirm or cancel the Store Performance operation with ENTER or ESCAPE.
If you press and hold the STORE PERFORMANCE button for about 2 seconds, you enter directly into the
Performances and the arrowhead positions itself automatically next to the PERF menu function.
Even if you program all the available Performances with new settings, the original factory settings will never be
permanently lost. You can restore the original settings at any time with the RESTORE function, but before
doing so, you should remember to save your programmed Performances to disk (PK7 only) before using
restore, in order to avoid losing them. In the case of PK5, use the MIDI Dump function to dump the pro-
grammed data into an external data storage device (see MIDI/GENERAL chapter). Saving Performances to
disk (for PK7) is explained in the Disk chapter.
If you modify the first Performance of the 63 available, the instrument will power up to the programmed setting
every time.
You can also choose not to store your programmed Performances to disk (or dump them to an external data
storage device) by taking advantage of the battery-backed RAM which retains data after power down. Bear in
mind, however, that when the batteries loose their charge, all your programmed data in memory will be irreme-
diably cancelled.
To recap, to memorize a Performance, you should
1) Press the STORE PERFORMANCE button.
2) Confirm the display confirmation request (?) with ENTER.
PK7 PK5
Hint: When you select a STYLE with SINGLE TOUCH PLAY active, the original factory set Performance
associated to the Style is recalled, which you can modify and save to another Performance.
SAVE CHANGES TO A DIFFERENT PERFORMANCE (OR CREATE A NEW ONE)
To save the Performance to a location other than the current position where the modification were carried out,
use the following procedure:
1. Press the STORE PERFORMANCE button.
2. Rotate the Dial to select a different Performance.
The 3 Digit display area will show the selected Performance number (e.g. P01).
3. Press ENTER to confirm.
The Performance will be memorized to the selected location.
To Next Page
Loading...
Need help?
General
