○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
82 User Guide
○○○○○○○○○○○○○
Assigning the effect types
Regardless of the current mode (Style/Real Time, Song Style, Song mode), the method used to select and
assign the effects to the current Performance is identical.
HOW TO SELECT THE EFFECT TYPES
1. Press the Cursor buttons as many times as necessary until the arrowhead to the left of the display is next to the
REVERB or CHORUS menu function.
The display shows the effect type currently selected to the Performance.
2. Use the PAGE buttons to assign a different effect type to the selected DSP.
This operation allows you to scroll through the 22 effects available in both DSP units.
You can select an effect in both DSP units.
You can also change the general effect volume with the DIAL (Tempo/Data for PK5) or the + and – buttons
of the Sound selection keypad.
PK7 PK5
Note: You can also activate
the REVERB or CHORUS
function by holding the cor-
responding button pressed
for about 2 seconds.
To Next Page
Loading...
Need help?
General
