○○○○○○○○○○○○○
Sounds & Performances 35
○○○○○○○○○○○○○
Selecting Performances
Select a Performance when you want to change the entire keyboard sound combination, not just a single
sound. The Performances can also change the Sound combination of the Styles (see the Style chapter).
Use the following procedure to select a Performance:
1. Press the Cursor [ ] or [ ] buttons as many times as necessary until the arrowhead to the left of the display
appears next to the PERF menu function.
A quicker method of gaining access to the Performances is to hold down the STORE PERFORMANCE
button for about 2 seconds.
2. Select the Performances with the corresponding Function buttons (F1 … F9) under the display.
PK7 PK5
Rotate the DIAL, or use the + and – buttons of the Sound selection keypad to select a different Performance Group.
The Performance Group number is shown in the 3 digit display in the top left hand corner (G01, G02, etc.). The
current Performance name is appears at the top centre of the 8 digit display.
...........................
Selecting Performances and Style Lock
As the Performances are associated to the Styles, each time you select a Performance, you also recall the
Style to which it is associated.
If you prefer to select Performances without changing the Style auto accompaniment patterns, activate the
STYLE LOCK function.
PK7 PK5
To Next Page
Loading...
Need help?
General
