Rev. 00 04/19
OptiCenter OC06 Product description
23
Powder hopper**
Fig.
:
– For larger quantities of one powder type
– Capacity 60 or 100 liters
– Connection point for fluidizing/suction lance
– Connection point for external powder supply
– Connection point for recovered powder
– Fluidized, with venting connector
– Suitable for metallic powders
– Level sensor optionally available
When using the powder hopper, the venting hose must be connected to
the connector , and the ball valve (10) must be open during the
entire operation.
Is there no powder hopper, the ball valve must be closed.
Powder recovery system**
– Optional powder return into the powder bag cone or into the powder
hopper or into the extraction system
– Plug position (extraction system) monitored by sensor
The parameterization of this option is done on the Touch Panel.
To Next Page
