Gema OptiCenter OC06 - Powder Feed to Guns; Injector Unit

Rev. 00 04/19
24

Product description OptiCenter OC06
Fig.
13
Powder feed to guns**
– Powder feed to guns from powder bag cone or original powder
container
– Use up to max. 2 guns
– Fluid/suction lance(s)
– Not included in the cleaning procedure of the OptiCenter
– For manual, simple coating tasks
Fig.
14
Injector unit**
– Powder feed to guns from the OptiSpeeder
– CAN bus capable gun control units mounted outside the OptiCenter
– Full integration into the cleaning procedure of the OptiCenter
– For manual coating tasks
– Up to 2 injector units can be used for optimum cleaning performance
(rinsing)
– Supply of conveying air and supplementary air by the gun control
unit
– Supply of the pinch valve air and rinsing air through the valve pool in
the OptiCenter
The parameterization of this option is done on the Touch Panel.