Gema OptiCenter OC06 - Functions Available at User Level; User Administration; Status Display; Login

Rev. 00 04/19
36

Touch panel / operating panel OptiCenter OC06
– User level 1 (Gema service)
– User level 2 (user 1)
– User level 3 (user 2)
– User level 4 (user 3)
These user levels are pre-programmed and cannot be changed.
The functions available depending on the user level are explained below.
Functions available at user level
User
Admin
Gema
Service
user 1
user 2
user 3
User level
0
1
2
3
4
User groups
Administ
rator
Service
Supervis
or
Operator
Painter
The panel can be used without any
limitation

–
–
–
–
Level for trained Gema personnel


–
–
–
Configuration possible

–
–
–
–
Plant parameters can be modified



–
–
If no user is logged on to the panel,
operation is locked
–
–
–
–
–
User administration
Status display
The login status is displayed in the corresponding bar:
User logged in
User logged out
Login
The user can log in as follows:
– By clicking on the symbol in the login status bar , if another user
has previously logged out