Rev. 00 04/19
66
Operation OptiCenter OC06
– The Coating menu is closed and switches back to the main
menu
– The level control is switched off
– The vibrator switches off
3. Clean the OptiCenter
– See chapter "Cleaning" on page 71.
4. Turn the main switch to the OFF position
– the interior lighting goes out
Replacing the powder bag
1. Check visually the powder level in the bag cone
2. Hold the full powder bag ready
3. Switch this on if it is has not been switched on already
4. 5.
6. 7.
8. 9.
To Next Page
