Gema OptiCenter OC06 - Page 68

Rev. 00 04/19
68

Operation OptiCenter OC06
ATTENTION
Overheating or clogging of the US sieve
The US sieve can break if it has already been configured in the
configuration menu and is not inserted in the OptiSpeeder.
► Insert the OptiSpeeder cover WITH the US sieve
The US sieve can become clogged if it has not been configured in
the configuration menu and is inserted in the OptiSpeeder.
► Insert the OptiSpeeder cover WITHOUT US sieve
6.
7. Select the desired operating mode
8. Do not coat before the set powder level has been reached.
– The OptiSpeeder is now filled with powder.
If an error message is displayed, correct the error and
acknowledge the error message so that the coating process
continues.