Gema OptiStar 4.0 - A Summary of the Directives and Standards

Rev. 00 03/19
12

Product description OptiStar 4.0 (CG24-CP)
Any other use is considered non-compliant. The manufacturer is not
responsible for any incorrect use and the risks associated with such
actions are assumed by the user alone!
For a better understanding of the interrelationships in powder coating, it is
recommended that the operating instructions for all other components be
read as well, so as to be familiar with their functions too.
A summary of the directives and standards
This product was built according to the current state of the art. The
product is subject to the European directives and complies with the
following standards.
The product is suitable for the intended purpose and can be used in the
appropriate areas.
For further information, also refer to the enclosed Declaration of
Conformity.
European directives RL
EG-RL
2006/42/EU
Machinery
EG-RL
2014/34/EU
Equipment and Protective Systems in Potentially
Explosive Atmospheres (ATEX)
EG-RL
2014/30/EU
Electromagnetic compatibility
EN European standards
EN 50177
Stationary electrostatic application equipment for
ignitable liquid coating material - Safety requirements
EN 50050-2
Electrostatic equipment for areas where there is
danger of explosion - electrostatic hand held
equipment
Part 2: Electrostatic hand-held spraying equipment
EN 12981
Coating plants – spray booths for application of
organic powder coating material - Safety
requirements
Recognized safety-related regulations
764 / DGUV
Information
209-052
Electrostatic coating
Trade Union information concerning health and
safety during work (BGI)