Rev. 00 03/19
24
Product description OptiStar 4.0 (CG24-CP)
Communication with the Gema electrostatic app
The control unit is prepared for communication* with the Gema
electrostatic app.
The electrostatic app is optimized for mobile devices with a
screen diagonal up to 15 cm (6").
The app enables customers to improve their productivity by providing the
following areas:
All important application parameters are
clearly displayed on the mobile device and can
be adapted immediately.
The coating productivity data can be retrieved
at any time. Statistics and cost estimates of
the order are generated automatically.
Maintenance can be scheduled.
This configures the OptiStar control unit. The
OptiStar can be controlled individually or as a
participant in a group.
System information and diagnostic data can
easily be retrieved and sent as e-mail.
Enables direct access to the operating
instructions of the system components and to
the Gema website.
The secure connection between the control unit and the device can be
established very easily with the help of the key.
The prerequisite for this is that every control unit in the system already
has its own Bluetooth ID number. See chapter "System parameter P11
(Bluetooth ID no.)" on page 36.
A description of the app can be found in a separate manual.
* Disabled in network operation
To Next Page
Loading...
