Gema OptiStar 4.0 - Connection Instructions

Rev. 00 03/19
28

Assembly / Connection OptiStar 4.0 (CG24-CP)
Connection instructions
The Gun control unit and the Application pump(s) are supplied ready for
use by the manufacturer. Just a few cables and hoses must be
connected.
fig.
14
: Connecting guide – overview
1 Electrode rinsing air hose
2 Powder hose
3 Gun cable
4 Pinch valve air
5 Spraying air hose
6 Transport air hose
7 Control signal cable
8 Application pump no. 1
8.1 Application pump no. 2
9 Gun control
10 Compressed air hose
11 Hose coupling Ø 8/6 –
Ø 6/4 mm
12 Powder hopper