Rev. 00 03/19
26
Product description OptiStar 4.0 (CG24-CP)
Background illumination
Brightness
8 different brightness settings are available for the display. The setting
remains in place when the machine is switched on/off.
Fig.
Auto Power Save mode
If no powder is being applied, then the background lighting turns off
automatically 5 minutes after a button has been pressed last time.
Correction values
The Gun control unit can be adapted with the correction values optimally
to local conditions (e.g. the adjustment of different powder outputs in the
plant).
See chapter "Entering the correction values" on page 48.
To Next Page
Loading...
