Gema OptiStar 4.0 - Operating Elements

Rev. 00 03/19
OptiStar 4.0 (CG24-CP) Product description

17
Operating elements
Displays
The desired and actual values are distributed across several
levels.
– The key is used to switch between the levels.
– If no controls are used within 6 s, the device automatically
returns to level 1.
Fig.
4
: Displays, Level 1
Designation
Function
A1-A4
Display of actual values, desired values and system
parameters
– Flashes when the possible range is exceeded.
A5
Display of program numbers, error diagnosis codes
and status information
S1
Powder output (display in %)
S4
Total air volume (display in Nm³/h)
S7
High voltage (display in kV)
S9
Spray current (display in µA)
S12 remote
Remote operation mode, no local operation possible
– Remote operation mode is used as keyboard
lock, reduced operation is possible
S13
Gun release
S14 system
System release via external release
S15
Display of predefined operating modes or display of
cleaning mode during cleaning
S20
– Display of readiness for pairing the Bluetooth
module with a mobile device (green)
– Display of an active connection (blue)