Rev. 00 03/19
OptiStar 4.0 (CG24-CP) Maintenance / Repairs
55
Maintenance / Repairs
General information
The product was designed for a maintenance-free operation.
Periodic checks
The periodic checks include examining all connecting cables and hoses.
The corresponding parts should be replaced immediately if any damage
to cables or hoses is discovered.
All plugs must be properly tightened.
Repair work
In the event of malfunctions or faults, the product must be checked and
repaired by an authorized Gema service workshop. The repairs must only
be performed by an authorized specialist.
Improper tampering can result in serious danger for user and equipment.
To Next Page
Loading...
