Gemalto Prox–DU - CCID Escape Control Code for Linux and Mac Operating Systems

Reference Manual
Prox–DU & Prox–SU
www.gemalto.com
DOC118569D Public Use Page 103/145
The supported operating systems are the following:
• Linux
• Mac OS X
o Snow Leopard (10.6)
o Leopard (10.5)
o Tiger (10.4)
CCID Escape Control Code for Linux and Mac Operating Systems
The application should use the following control code to send the escape command:
• #define IOCTL_CCID_ESCAPE SCARD_CTL_CODE(1)
Defining the vendor IOCTL for the CCID Escape Commands supported by the Prox–DU or
Prox–SU reader/writer:
• Get firmware version
• Switch interface