Gemalto Prox–DU Reference Manual

Reference Manual
Prox–DU & Prox–SU
www.gemalto.com
DOC118569D Public Use Page 24/145
• Card protocol:
o T=0 and T=1 protocols
• Card compliance:
o EMV and PC/SC modes. The interface is compliant with the EMV version
4.0 specifications.
o ISO 7816-3 and -4 and ability to supply the cards with 5 V, 3 V, or 1.8 V
(Class A, B, or C cards respectively)
o IAS version 1.0 certified (Identification, Authentication & Signature)
LED interface
Two LEDs are available as visual indicators:
Figure 17 – Visual indicators
The indicators give information about the smart card interface as described in the next table:
Card Indicator Description
Off The card interface is deactivated
Slow Blink (0,2 s / 2 s) The card interface is ready
Blink (0,5 s / 1 s ) The card is present and inactive (powered off)
On The card is present and active (powered on)
Flashing The card communication is in progress
Note: When no SIM/SAM card is inserted into the Prox–SU, the yellow indicator will always
be off.
Contact card
yellow indicator
Contactless card
blue indicator

Gemalto Prox–DU Specifications

General

Brand	Gemalto
Model	Prox–DU
Category	Card Reader
Language	English