Gemalto Prox–DU Reference Manual

Reference Manual
Prox–DU & Prox–SU
www.gemalto.com
DOC118569D Public Use Page 86/145
Bit 0 = Slot 0 current state
Bit 1 = Slot 0 changed status
Bit 2 = Slot 1 current state
Bit 3 = Slot 1 changed status
Bit 4 = Slot 2 current state
Bit 5 = Slot 2 changed status
Bit 6 = 0b
Bit 7 = 0b
For the contact smart card Interface only slot 0 is defined. Therefore, bSlotICCState can
have the following value:
00h: no ICC present, no change since the last RDR_to_PC_NotifySlotChange
message was sent
01h: ICC present, no change since the last RDR_to_PC_NotifySlotChange message
was sent
02h: no ICC present, the slot has changed state since the last
RDR_to_PC_NotifySlotChange message was sent
03h: ICC present, the slot has changed state since the last
RDR_to_PC_NotifySlotChange message was sent

Gemalto Prox–DU Specifications

General

Brand	Gemalto
Model	Prox–DU
Category	Card Reader
Language	English