DF 7500
TL099-01-00-15
26-03-2015
façon à ce qu’elle touche la base, actionner
l’oscillation jusqu’à que la goupille entre dans
l’orifice prévu.
position, push down the block pin (Fig. 47)
touching underneath plate, push automatic
oscillation button to make frame turning so
that the pin snaps in the next slot.
(Fig. 46) (Fig. 47)
Pour éteindre la radiocommande, tourner la
clef (1) en position OFF. Extraire la clef
To stop radio control system turn the starting
key (1) to OFF position, and extract it.
Pour de plus amples informations se référer au
MANUEL D’UTILISATION propre à la
radiocommande.
For more informations, make reference to the
radio control system USER MANUAL.