1- When sizing a system’s 24 V supply, a 1 A inrush current with a 1 ms duration should be considered for each device on the power supply
Assumes transmitter was ordered with relays
Figure 25 Local and Remote Sensors
Table 3 Maximum Mounting Distance for Local and Remote Sensors, Imperial Units
1- When sizing a system’s 24 V supply, a 1 A inrush current with a 1 ms duration should be considered for each device on the power supply
Assumes transmitter was ordered with relays
Table 4 Maximum Mounting Distance for Local and Remote Sensors, Metric Units
To Next Page
Loading...
