93
Here are descriptions of every setup items:
Enable Virtual Check this box to enable virtual server,
Server (1): and uncheck this box to disable virtual server.
Private IP (2): Input the IP address of the computer which
provides Internet service.
Computer Name (3): Pull down the menu and all the computers
connected to the router will be listed here. You can
easily to select the computer name without checking
the IP address of the computer.
Private Port (4): Input the port number of the IP address
which provides Internet service.
Type (5): Select the type of connection, TCP or UDP. If you’re
not sure, please select ‘Both’.
Public Port (6): Please select the port number of Internet IP address
which will be redirected to the port number of local
IP address defined above.
Comment (7): Please input any text to describe this mapping, up to
16 alphanumerical characters.
Add (8): Add the mapping to virtual server table.
1
2 3 4
5
8 9
10
11 12 13
14
7 6
To Next Page
Loading...
