112
Here are descriptions of every setup items:
Enable DMZ (1): Check this box to enable DMZ function, uncheck
this box to disable DMZ function.
Public IP You can select ‘Dynamic IP’ or ‘Static IP’ here.
address (2): If you select ‘Dynamic IP’, you have to select an
Internet connection session from dropdown menu; if
you select ‘Static IP’, please input the IP address
that you want to map to a specific private IP
address.
Client PC IP Please input the private IP address that the
address (3): Internet IP address will be mapped to.
Computer Name (4): Pull down the menu and all the computers
connected to the router will be listed here. You can
easily to select the computer name without checking
the IP address of the computer.
Add (5): Click ‘Add’ button to add the public IP address and
associated private IP address to the DMZ table.
Reset (6): Click ‘Clear’ to remove the value you inputted in
Public IP address and Client PC IP address field.
1
2
4
56
7
8 9 10
11
3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
