79
anything. You can input up to 16 alphanumerical
characters here. This is optional and you can leave
it blank, however, it’s recommended to use this field
to write a comment for every MAC addresses as a
memory aid.
Add (7): Click ‘Add’ button to add the MAC address and
associated comment to the MAC address filtering
table.
Clear (8): Click ‘Clear’ to remove the value you inputted in
MAC address and comment field.
After you finish with all settings, please click ‘Apply’ (9) button and the
following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on
other setup procedures, or click ‘Apply’ to reboot the router so the
settings will take effect (Please wait for about 30 seconds while router is
rebooting).
If you want to reset all settings in this page back to previously-saved
value, please click ‘Cancel’ button.
To Next Page
Loading...
