Need help?Do you have a question about the GILBARCO VEEDER-ROOT Applause Media System and is the answer not in the manual?
General| Brand | GILBARCO VEEDER-ROOT |
|---|---|
| Model | Applause Media System |
| Category | Server |
| Language | English |
General information about the Gilbarco Site Server and its role in the Applause Media System.
Details the scope and content of this installation, service, and parts manual.
Lists necessary tools and equipment for installing and servicing the Applause Media System.
Provides a high-level description of the system's operation and major components.
Instructions on how to safely shut off all power to fueling equipment in an emergency.
Precautions for preventing fires and explosions when working with fuels and electricity.
Covers essential preparations and precautions before starting the installation process.
Guidance on planning the installation to minimize downtime and ensure proper setup.
Pre-start-up checks and requirements for the Applause Media System installation.
Step-by-step guide for installing the site server software from USB or CD-ROM.
Procedure for configuring the Applause Media System after the site server setup.
Details on configuring network parameters for the Gilbarco Site Server.
Guidelines for preventing Electrostatic Discharge damage to electronic components.
Steps to diagnose and resolve issues related to connectivity between system components.
Procedure for identifying and correcting incorrect IP address configurations.
Troubleshooting steps for when the Gilbarco Site Server software fails to load.
Lists internal components and their part numbers for the Gilbarco Site Server and related equipment.
A list of recommended spare parts for maintaining the Applause Media System.
Instructions for configuring network IP addresses for Gilbarco dispensers.
Steps to configure a Cisco router for network connectivity with the system.
Steps to configure a Linksys router for network connectivity with the system.
Procedure for physically installing a secondary Network Interface Card into the site server.
Steps to configure the network settings for the newly installed secondary NIC.
Details on setting encryption levels for secure communication between system components.
Instructions for managing usernames and passwords for site server access.
To Next Page