Section 2 System Overview
2.1. General
This section provides a detailed description of the OrPAY1000 system, as well as the available configurations,
system specifications, and communication standards.
2.2. Main Features
The OrPAY1000 payment terminal is small enough to fit in any standard pump head or pedestal, yet
provides an amazingly efficient advanced user interface with its 4.3” multimedia color display, 4 screen
addressable keys, and full alphanumeric vandal proof 40-key keyboard. Additionally, the device enables
various communication interfaces such as LAN, RS-485 to the station controller (FCC), or POS.
OrPAY1000 is designed specifically as a pay at the pump solution at retail sites for cash or fleet card fuel
purchases, forecourt promotions, local accounts, loyalty schemes, and attendant management. In addition,
OrPAY1000 features simplicity, while enabling all common authorization methods as well as simple data
entry by drivers utilizing the terminal's keyboard (see Figure 2-1).
Figure 2-1 - OrPAY1000 Main Components
Note: OrPAY1000 is supplied without a power supply. See Power Supply Requirements for
further details and requirements.
2.3. Available Configurations
OrPAY1000 is available in several configurations, depending on its intended use and which pump card is
installed. This section describes each of the configurations available and their intended function.
2.3.1. Current Loop
OrPAY1000 with an embedded Current Loop card is intended for pumps that use current loop
communication such as Wayne, Bennett, or Gilbarco.
The following lists the P/Ns for available OrPAY1000 configurations with an embedded Current Loop card:
OrPAY1000 Pump Interface with 4xCL: 819527850
OrPAY1000 Pump Interface with 2xCL: 819527852
OrPAY1000 Installation and Setup Manual 3
To Next Page
Loading...
Need help?
General
